How do I reset my Whirlpool gas range?
Reset power to the product:
- Power unit down by turning off the circuit breaker(s) for one (1) minute.
- Power unit up by turning on the circuit breaker(s).
- Start a bake cycle.
- Monitor the oven for one (1) minute to ensure the error code does not display again.
- Verify oven operation.
How do you use a Whirlpool gas oven?
Hold a lit match near a burner and turn knob counterclockwise to IGNITE. After burner lights, turn knob to setting. IMPORTANT: Do not obstruct the flow of combustion and ventilation air around the burner grate edges. Before cleaning, make sure all controls are off and the oven and cooktop are cool.
How do you start a Whirlpool gas range?
Operating Whirlpool gas or electric cooktops and ovens is simple. To use your electric cooktop, push in on the control knobs and turn to set the temperature between “Lo” and “Hi”. Light the flame on Whirlpool gas cooktops by pushing in on the control knobs and turning the counter-clockwise.
Is there a reset button on Whirlpool stove?
Press the “Off/Clear’ button for three seconds to turn the “Control Locked” child lock off. Reset the cooking program if “Off/Clear” was pressed accidentally. For example, press the “Defrost” button again, and turn the dial to select the defrost time you want again. Press “Start.”
Why is my Whirlpool stove not heating?
If the thermal fuse does not have continuity, replace it. The thermal fuse cannot be reset—if the fuse has blown, it must be replaced. One of the wires that supply power to the oven element or igniter might be burnt out. These wires commonly burn out near the heat source.
How do I use my Whirlpool oven?
How to use an oven: preheating and cooking tips
- Step 1: Determine what type of oven you have.
- Step 2: Adjust your oven racks for broiling, baking or roasting.
- Step 3: Preheat the oven to the right temperature.
- Step 4: Monitor your food cooking in the oven.
- Step 5: Keep food warm in the oven until you’re ready to eat.
How do I turn on my Whirlpool oven range?
Press CLOCK or START. or by a manual switch located on the top left corner of the range console. While the oven door is closed, press the oven light switch to turn the light on and off. The oven light will come on when the oven door is opened.
How do I start my Whirlpool oven?
To preheat a Whirlpool oven, begin by pressing the Bake function. The oven will automatically display a temperature of 350 degrees Fahrenheit (175 degrees Celsius). If you need to bake at a higher or lower temperature, use the arrows to adjust. Then press Start.
What model is my Whirlpool stove?
You will find the model number on a sticker or rating plate. This can usually be found either on or behind the door frame, or behind the filter flap at the bottom of the appliance. Model numbers usually consist of a manner of letters and numbers, and may also include characters such as a slash (/) or a dash (-).
Where do I find my Whirlpool stove model number?
Whirlpool. You will find the model number on a sticker or rating plate. For cookers and ovens this can usually be found around the frame, behind the door of the appliance. For hobs this can usually be found on the underside, side or back of the appliance.
Why is my Whirlpool oven not getting up to temperature?
You will likely find the lower bake element not heating. The failure could be the bake element, faulty oven control or possibly a burnt or loose wiring connection. If bake element is heating and the upper broil element is not, it could have a faulty broil element, faulty control board or possibly a faulty thermal fuse.
How to open a whirlpool stove?
Preheat a Whirlpool Oven. To preheat a Whirlpool oven,begin by pressing the Bake function.
How many Watts Does a whirl pool gas stove have?
There are some average ranges, however, that apply to both electric coil and glass-top ranges. The largest burners typically pull around 2,500 watts when turned on to the highest setting. Medium-size burners pull, on average, between 1,500 and 1,800 watts on the high setting, while small or simmering burners pull an average of 1,200 watts.
How do you clean a whirlpool stove?
Wipe up any remaining water from inside the oven with a sponge or cleaning cloth. Whirlpool recommends a non-scratch copper scrubbing pad to clean stubborn, stuck-on spots. Clean the oven three times annually if you use it infrequently, or roughly once monthly if you use the oven daily.
Why is my Whirlpool oven not working?
Today’s electric ranges require 240 volts of alternating current (AC) that separate and travel through two legs of 120 volts of ac.