What are 10 safety rules to follow with a scroll saw?
Never wear gloves, a tie, loose clothing, a watch, rings, or jewelry when using a scroll saw. Tie long hair back or secure under a cap. Prior to starting, assure the blade guard is in place and belt guard is closed and tight. Always use the correct saw blade for the cutting task.
What are 5 safety rules for a table saw?
Safety Rules Safety glasses and hearing protection are required. Never saw freehand. Never clear small pieces while blade is moving. Never adjust saw or setup while saw is running.
How do you use a hand saw safely?
Apply pressure on downstroke only.
- Hold stock being cut firmly in place.
- Use a helper, a supporting bench or vise to support long stock if required.
- Keep teeth and blades properly set.
- Protect teeth of saw when not in use.
- Keep saw blades clean.
What are the safety rules for a drill press?
Drill Press Safety Rules
- Run drill at correct RPM for diameter of drill bit and material.
- Always hold work in a vise or clamp to the drill table.
- Use a correctly ground drill bit for the material being drilled.
- Use the proper cutting fluid for the material being drilled.
- Remove chips with a brush, never by hand.
Which of the following is a critical step in using a circular saw safely?
What should you do before start cutting with a circular saw? Wear safety glasses or goggles, or a face shield (with safety glasses or goggles). Wear an approved respirator or dust mask when exposed to harmful or nuisance dusts. Use appropriate hearing protection equipment in noisy areas.
How does a table saw safety work?
The blade carries a small electrical signal, which the safety system continually monitors. When skin contacts the blade, the signal changes because the human body is conductive. The change to the signal activates the safety system.