Do Rhino axles have lifetime warranty?

Rhino Brand Axles are backed by a 1-year warranty so you can ride hard without worrying.

Are RZR 1000 and Turbo axles the same?

For example, the front and rear CV axles are not the same on the Turbo RZRs and RZR XP 1000s. Generally, the two front RZR axles are the same, and the two rear RZR axles are the same. But a rear RZR axle will not work on the front.

Are the Rhino 2.0 axles any good?

Rhino 2.0 Axles are the best bang for your buck in the industry. It might sound too good to be true, but they’re stronger than your stock axles, they have a better warranty than whatever Can-Am, Polaris, or Honda gives you, and they cost less than a stock replacement.

Are Rhino 2.0 axles good?

Are Rhino 2.0 axles lifetime warranty?

TERMS OF WARRANTY SuperATV Rhino 2.0 Axles (excluding boots) are warrantied to the original purchaser for a period of 18 months from the date of purchase. If the axle fails for any reason within 60 days from the date of purchase, SuperATV will ship a replacement axle free of charge.

What size is the axle nut on Rzr 1000?

Brand new castle nut, two washers and cotter pin used on most Polaris RZR axles. Exact replacement for Polaris 7555796 (washers), 7547337 (castle nut), and 7661404 (cotter pin)….RZR 1000 Front/Rear Axle Nut and Washer Kit.

Weight 6 oz
Dimensions 9 × 7 × 1 in

How much torque does a RZR 1000 have?

114 FT-LBS
Turbocharged Fury – 168 Horsepower Prostar Engine Fuel is electrified with a forced charge of induction creating an unequaled combination of 168-horsepower and locomotive low-end torque, in excess of 114 FT-LBS, with instant delivery.

What is the torque spec for RZR wheels?

120 ft-lbs
Aluminum wheels should be torqued to 120 ft-lbs (163 Nm). Steel wheels should be torqued to 60 ft-lbs (81 Nm). Lower the vehicle completely.

How do you remove a rear axle bearing without a puller?

Steps to take if you want to know how to remove bearing from the shaft without a puller

  1. Apply the vehicle’s parking brake.
  2. Use a car jack to raise your vehicle.
  3. Place jack stands under your vehicle.
  4. Remove the tires.
  5. Unbolt the caliper and remove the Brake pads from it.
  6. Remove the vehicle’s disk rotor.