How do I enable iLO 2 on HP server?
Re-Enabling the dedicated iLO 2 management port Connect the iLO 2 dedicated management NIC port to a LAN from which the server is managed. Reboot the server. When prompted during POST, press the F8 key to enter iLO 2 RBSU. Select Network, NIC, TCP/IP and press the Enter key.
How do I manually configure iLO IP address?
Press the F8 key when prompted during POST. The iLO 3 RBSU runs. Select Network –>DNS/DHCP, press the Enter key, and then select DHCP Enable. Press the spacebar to turn off DHCP.
How do you enable iLO in HP ProLiant dl380 g7?
Press F8 in the HPE ProLiant POST screen. The iLO RBSU screen appears. The Network Autoconfiguration window opens. Press the spacebar to set DHCP Enable to OFF, and then press F10 to save the changes.
How do I know if iLO is configured?
By default all iLOs are enabled using DHCP, if you plug them into a network with a DHCP server they will get an address. To see what IP is assigned, either watch during POST when the iLO firmware displays, or use the HPONCFG utility from the host OS. >c3000/c7000 chassis.
How do I find the IP address of my iLO port?
During the HP server boot process, press the F9 key to access the system utilities.
- Select the System Configuration option.
- On the next screen, select the iLo Configuration Utility.
- Select the Network Options entry.
- On this screen, you will be find out the HP iLo interface IP address.
How do I access iLO on HP server?
Open a browser software, enter the IP address of your iLO interface and access the administrative web interface. On the prompt screen, enter the administrative login information. After a successful login, the administrative menu will be displayed. Access the iLO Information menu and select the Overview option.
What is iLO configuration?
Integrated Lights-Out, or iLO, is a proprietary embedded server management technology by Hewlett-Packard Enterprise which provides out-of-band management facilities. The physical connection is an Ethernet port that can be found on most ProLiant servers and microservers of the 300 and above series.
How do I find my iLO IP address?