How do I log into my Netgear Powerline 1000?

Connect to the WiFi channel of the adapter and then go to This will allow you to log into the adapters settings. Default username and password are admin and password. Alternatively use Netgear Genie on PC, go onto Network Map and select Powerline Adapters (usually takes a minute or two to appear).

How do I log into my Netgear Powerline?

Netgear Powerline Setup | Netgear PLW1000 Type in the search box and tap the ENTER button. Now you will be redirected to the login page where you have to fill your personal credentials. On the netgear Genie list , Click on “Do more” and then click on the fastlane button.

How do I change the password on my Netgear Powerline 1000?

connect to the powerline wifi. go to default login should be admin default password is password — if you changed it, you’ll need to know your password. from settings you should be able to change wifi ssid and password.

How do I reset my Netgear Powerline 1000?

To reset PLW1000 to factory settings using NETGEAR genie Desktop:

  1. Use a computer or laptop that is connected to your existing powerline network.
  2. Open your NETGEAR genie Desktop.
  3. Click Network Map.
  4. Click powerline icon.
  5. Right-click your PLW1000 and select Factory Reset.
  6. Click OK to proceed in resetting the PLW1000.

Is the Netgear Powerline 1000 Wireless?

Just plug the Powerline Adapter into your modem or router, then plug in the companion PowerLINE WiFi access point to an electrical outlet. It’s that easy. With 1000 Mbps speed and Homeplug AV2 support, the PowerLINE WiFi 1000 is perfect for connecting smart TVs, streaming players, and game consoles wirelessly.

How do I change my Powerline password?

Changing the network password on the Powerline adapter

  1. Launch the Powerline Adapter Configuration Utility.
  2. Click on the Security tab.
  3. Enter your unique Network Password on the field provided.
  4. Click . Your new unique network password for your Powerline adapter is now set.

What is my NETGEAR admin password?

By default, the user name is admin and the password is password. Newer NETGEAR routers prompt you to change the default password during the setup process for improved security.

How do I reset my Netgear Powerline WiFi extender?

Press and hold the Security/Factory Reset button on each Powerline adapter for 8 to 10 seconds to return the device to its factory default settings. NETGEAR, Inc.

How do I reset my Powerline adapter?

Resetting Powerline Fast Ethernet Adapters

  1. Use a pin or any pointed object to press and hold the Reset button for 10 seconds.
  2. Check the LEDs of your Powerline adapter.
  3. Click the Linksys Powerline AV Utility icon.
  4. Click the Administrator tab.
  5. Click Restore.