How do I program my TV2 remote to my dish receiver?

Program Remote

  1. On the front panel of your receiver, press the SYSTEM INFO button. (Buttons are behind the door on the right side of the front of the receiver)
  2. On the front of your remote, press the SAT button.
  3. Press the RECORD button.
  4. Select Done.

How do I reset my DISH remote 2?

Reset and Program Dish Remotes If you have confirmed you are using the correct remote and problems persists, press the Sat button on the remote, followed by the Sys info/System info button on the front face of the receiver. At this point, press the Sat button on the remote again.

Why is my remote not working for DISH?

If the Dish remote is beeping, the remote is trying to locate the signal from the receiver. The receiver can easily be reset by unplugging it from the power source and waiting 10 seconds. It will take about 5 minutes for the system to reset. To reconnect the receiver and remote, remove the batteries from the remote.

How do I turn on TV2 on my dish receiver?

Go to the TV2 section using the remote control navigation buttons. Choose either “Cable” or “Air” depending on the function set on your secondary TV. Cable will default to modulated output channel 73 and air will default to channel 60. You can change either of these if you need to, but that shouldn’t be necessary.

How do I reset my DStv 2 remote to 1?

Press the DStv button • Go to “Settings” • Select System Settings • Select Remote Control • If the remote is set to mode 1, set mode 2 and 3 to Ignore. If the remote is set to mode 2, set mode 1 and 3 to Ignore.

How do I connect my second TV to Dish Network?

How to Hook Up a 2nd TV to Dish Network

  1. Inspect your system.
  2. Trace the two lines coming out of the dish and see where they go.
  3. Connect your coaxial cable to one of the outputs on the splitter.
  4. Run the cable (from the dish or the output on the splitter) to your satellite receiver.

How do I pair my remote to my Joey?

Hopper, Joey, Wally

  1. Press the HOME button twice, or the MENU button once, depending on your remote.
  2. Select Settings.
  3. Select Remote Control.
  4. Arrow to and select the device code you want to learn.
  5. Select the appropriate Pairing Wizard for the device.
  6. Follow the on-screen prompts.

What channel does TV 2 need to be on for Dish Network?

If TV2: Tune your TV to channel 60 or 73 using the buttons on your TV remote or the TV itself. b. Once your TV picture is restored, press and release the SAT mode button on your DISH remote to ensure you’re in the proper mode for controlling your receiver.

What channel should TV 2 be on for Dish Network?

Using the TV manufacturer’s remote or channel buttons on the TV itself, tune to channel 60. If a DISH picture does not appear, try channel 73.

How do I program my DStv remote to TV2?

If the green light blinks below BACK, the remote is in TV2 mode. To set the remote to TV2 mode: press and hold the BACK button for 3 seconds or until you see the green light blink on TV2 (below the BACK button).