How do I reset my Sceptre monitor?
Hold the power button for 30 seconds after you have disconnected your Sceptre TV from power. Leave it unplugged for 60 seconds before plugging it back in again. You can then try and turn on your Sceptre TV using the power button on your TV and hold for 30 seconds.
How do you fix a black screen on a Sceptre TV?
Reboot your HDCP video device but turning them off and unplugging the power cord. Wait up to 8 minutes to plug the power back in to see if it works or not. 2. If you are still experiencing issues, turn the TV off for 10 seconds then turn it back on.
How do I fix my TV when the screen goes black?
Replace the HDMI cable as it may have a short or another defect which causes the black screen issue. Unplug the TV for 5 minutes to attempt a reset. Unplugging the TV will reset the television and clear any temporary issues. Factory reset of the TV to resolve the issue.
Why does my Sceptre monitor go black?
Normally a black and white picture is caused by incorrect cabling. This can happen if a composite cable is plugged into a component connection or if a component cable is plugged into a composite connection. Make sure that the correct cables are connected from the source to the back of the TV.
Why did my Sceptre TV go black?
Unplug and re-plug every single connection (sounds silly, but it has fixed many an issue.) Try out a different connection (if you’re on HDMI try component cables, or even just the oldschool RCA cables (yellow video cable) and see if anything happens. If not unplug overnight and try again in the morning.
Why is my Sceptre TV not showing picture?
Reboot your HDCP video device but turning them off and unplugging the power cord. Wait up to 8 minutes to plug the power back in to see if it works or not. If your unit is still giving you trouble, you will need to contact Sceptre’s Technical Support Group for help.
Why is my LED TV screen black?
Check the Backlight If the backlight burns out or stops working, the picture will appear black. To see if your TV’s backlight is causing the problem, make sure your TV is on, and turn off the lights in the room. Shine a flashlight on the screen to see if there’s a picture.