How do you drill a square hole in wood?

How to Do It

  1. Install a suitable drill bit.
  2. Place the drill bit to one corner of the drawn square.
  3. Using a high powered drill, drill until you’ve made a clean hole through the wood.
  4. Repeat the previous steps with each square corner.
  5. Use the saw to cut along the reference square lines.

Is there a drill bit that cuts square holes?

What is a square drill bit called? Square holes are mortises, and drill bits used to drill square holes are called mortise bits. These bits are used in mortising machines or drill presses. A mortise bit consists of an auger bit and a chisel bit.

How do you cut a perfect square hole in wood?

While using a chisel or a drill are both effective ways of cutting a square hole in a thick piece of wood, the most common option is undoubtedly to use a jigsaw. It makes cutting a perfect square a job that will barely take you minutes.

What is a square drill bit called?

Square drill bits are also called mortise bits, and the writers from Banging Toolbox post that the best ones fit universally in most mortising machines and drill presses that have hammering functions.

How do you cut a square hole in wood without a jigsaw?

If you don’t have a jigsaw, or any power saws for that matter, another way to cut a square into wood is by using a hand saw. Of course, this is a bit more difficult, but with some practice, it is doable. The main trick to remember here is that you need to use a hand saw that has a thin blade.

How does a square hole bit work?

Like all drill bits, the auger bit bores a hole and ejects the chips. Meanwhile, the four sharp edges of the chisel pare the wood around the bored hole into a square shape. The auger bit removes this waste, as well, through a chip ejection slot in the chisel.

Can I use a mortise bit in a hand drill?

Pro Tip: Don’t attempt to use a mortising bit in a handheld power drill. We’ve tried it…and it doesn’t work. If you attempt to use a mortising bit in your drill press, you’re going to need to retrofit your machine quite a bit.