How do you hang curtains on a double curtain rod?

Pre-drill holes for the screws with a 1/8″ bit. Insert the screws into the holes, leaving 1/4″ of the screw sticking out. Slide the bracket onto the screws and tighten the screws to secure the bracket to the frame. Level and secure the other bracket: Place the curtain rod into the right bracket.

What is a double rod for curtains?

Double curtain rods allow you to hang two layers of curtains. This gives your window a designer look and helps add dimension to the window.

Which curtain rods are best?

Best curtain rod overall: Decopolitan End Cap Single Curtain Rod Set. Best curtain rod for renters: RoomDividersNow Tension Rod. Best curtain rod for traverse draw heavy drapes: Rod Desyne Heavy Duty Adjustable Traverse Rod. Best curtain rod for blackout curtains: Umbra Twilight Room Darkening Curtain Rod.

How do you use a double curtain track?

How to Install

  1. Screw Double Brackets to the wall at required height.
  2. Loosen the screws underneath the brackets slightly.
  3. Insert the back track into the back section of each bracket and snap into place. Tighten the screws as you go.
  4. Repeat step 3 to fit the front track into front section of the bracket.

Why would you use a double curtain rod?

Although very similar in design to single curtain rods, a double curtain rod allows you to layer more than one drapery panel or curtain for a more enhanced and dramatic look. Most typically, people layer a sheer curtain first and then a regular curtain on top to block out light.

How many curtains should be hung on a double window?

With double windows, plan on using at least two panels per window or four panels for a double-width picture window. The number of curtains that you place on a double window is largely determined by your personal taste.

How to build and install double curtain rods?

1 can of oil-rubbed bronze spray paint (or your color of choice)

  • Curtain rings (optional)
  • Gloves (gardening,kitchen,etc.)
  • An extra set of helping hands

    • How to hang double rod curtain?

    Measure your bungee cord. First,measure out a length of bungee cord at least 4 or 5 inches past where both your curtain rod hooks are on your wall.

  • Tie your bungee cord to the curtain rod hooks.
  • Put a layer of curtain through the bungee.
  • Fluff the sides of your curtain.

    • How to hang double rod curtains?

    Count the rings you’ll need. First,you’ll need to figure out how many rings you’ll need and where to put them.

  • Line your rings up. Next,you’ll want to line out the rings you’re going to use and put them on your rod (or bungee!).
  • Hang your curtains.

    • By