How long do Dogtra collars last?
With normal use you can expect 2 or 3 days of run time from a full charge. Turning the e-collar off when not in use, a full charge can last over a week.
Why is my Dogtra not working?
Make sure your battery is charged in both the collar and the transmitter. Low battery charge can make for inconsistent functioning. Make sure both pieces are turned on and that the unit is properly synced so that the collar is receiving a signal from the transmitter.
How do you pair a dogtra handsfree?
Hold down the HANDSFREE Remote Controller button until the rapidly flashing light on the transmitter and controller both show a solid light. 5. Release all buttons. The HANDSFREE Remote Controller should now be coded.
How do I pair my dogtra IQ collar?
Set the Rheostat Dial to 0 and place the toggle switch in “I” position. 2. With the receiver turned off, place the red dot on the back of the transmitter to the red dot on the receiver. Hold the two red dots together for about 5 seconds until the green LED blinks rapidly on the receiver.
How long does dogtra battery last?
The batteries in the units have an average standby life of 34-hours. With moderate nick, constant or pager use, battery life will decrease to approximately 20 hours. If the unit will be stored unused for an extended period of time, we recommend fully charging the batteries every 2 months to maintain the batteries.
How do I pair my dogtra collar?
Place the red dot on the back of the transmitter to the red dot on the collar/receiver. Hold the two red dots together for about 5 seconds or more. Release them when the green LED blinks rapidly on the collar/receiver.
How do you reset a dog shock collar?
Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times. You may need to hold both units 2-3 feet from each other before this occurs. Once the Receiver Indicator Light has flashed 5 times, the Collar Receiver has been reset and will begin flashing as normal.
How does the dogtra hands free work?
The HANDSFREE PLUS series are built with technology that allows you to pair a HANDSFREE SQUARE to your transmitter allowing you to go handsfree. This allows your HANDSFREE SQUARE become a extension of your transmitter in allowing you to quickly access the Nick, Continuous or HPP Vibration function.