How much horsepower can a L92 handle?
They can handle about 850 hp. and 6,500 rpm in boosted applications. If you’re getting forged pistons, upgrade to Forged Connecting Rods at the same time. Even though it’s cast, the crankshaft can handle about 1000 hp.
Is the L92 a good engine?
Upgrading the L92 Camshaft and Valvetrain VVT is great in a street vehicle if you install a VVT cam and phaser-limiter along with a tune. Properly done, it makes more power and torque than a much bigger engine-yet idles well and retains most of the gas mileage.
What is the difference between L92 and LS3?
LS3 Heads and the L92 heads are Identical…. only difference between these 2 engines was the cam and pistons other than that they use the same heads. LS3 intake valves have a hollow stem, therefore lighter. LS3 heads are designed with hollow valve stems for higher reving.
How much HP can a L9H handle?
About 850 horsepower can be handled by them. Boosted applications can run at 6,500 rpm. You can upgrade to forged connecting rods at the same time if you are getting forged pistons. Even though the crankshaft is cast, it can handle about 1000 horsepower.
How much horsepower does a 6.2 L92 have?
403 hp
The L92 is a 6.2L Vortec engine used in the Escalade and several other GM SUVs and trucks. It boasts an all-aluminum design with traditional pushrod technology, but utilizes variable valve timing. It was rated from the factory at 403 hp and 415 lb-ft of torque.
Is a L92 an ls2?
As most GM High-Tech junkies know, the LS2 is a 364-inch, 400-horse, 400 lb-ft small-block GM V-8 that comes stock in the base Corvette, GTO, SSR, Trailblazer SS, or as a crate engine from GM Performance Parts….Results.
| 0.2 | 153 | 114.4 |
| 0.3 | 225 | 147.2 |
| 0.4 | 276 | 170.3 |
| 0.5 | 309.6 | 183.1 |
| 0.55 | 323.2 | 186 |
What vehicles came with L92 heads?
Those heads are the L92 castings that come as standard equipment on the L92 engine, found in such production vehicles as the 2007 Cadillac Escalade in 403-horse form.
What vehicles did the L92 come in?
The L92 is a 6.2L Vortec engine used in the Escalade and several other GM SUVs and trucks. It boasts an all-aluminum design with traditional pushrod technology, but utilizes variable valve timing. It was rated from the factory at 403 hp and 415 lb-ft of torque.
What are L92 heads?
The New Sherriff In TownIf you have your headset tuned in to chatroom buzz, then perhaps you’ve heard about the L92 heads. They are production, rectangle-port, aluminum heads being used on the new 6.2L GM truck engines for 2007.