How to install flush Pro?
Very easy install. Cut hose going to water pump and install FlushPro with arrow pointing in correct direction (towards pump). Assuming you are adding a deck inlet, add adapter to FlushPro and run hose to deck location. Drill hole, install Deck Inlet, and connect hose.
How do you use Perko flush pro?
Simply unscrew the Flush Pro™ cap, connect a standard garden hose, turn on the water and start your engine. The Flush Pro™ valve automatically pulls fresh water into the boat’s cooling system – even if the boat is in the water – flushing out the entire cooling system with fresh water.
How do you flush an inboard engine?
How Do You Flush An Inboard Marine Engine? Simply attach the fresh water hose to the Salt-Attack Mixer, then connect it to the engine cooling in-take pipe. Rub Salt-Away over your mixer cup. Rinse and flush the engine with fresh water for a period of time after setting the mixer to “rinse”.
How long should you flush an inboard motor?
The short answer is: at least 5 minutes, especially for dry-stored boats. But the ideal flushing length depends on whether the engine is at operating temperature.
Is an engine flush a good idea?
A good engine flush can help loosen deposits and dissolve sludge, helping return your engine to like-new condition. However, in old engines with high miles, sludge may be the only barrier keeping oil from seeping through worn or cracked seals. Removing the sludge exposes the seals for what they really are – junk.
What does salt-away do?
Salt-Away is used to dissolve and remove salt from any surface. It is water based, non-hazardous and biodegradable. It protects metals from corrosion by removing the salt that promotes corrosion. It also contains rust inhibitors that help protect the surface once the salt has been removed.
Is salt away worth the money?
This works great for me when i come back from a day on the water but may not have time to actually wash the boat for a few days. It gets all the salt off everything and actually leaves it pretty clean until i get a chance to give the boat a good scrubbing. Works great on rods/reels and fishing gear as well.
Is salt away just vinegar?
Salt away is just white vinegar (acetic acid) with a touch of detergent. Rather than buy the expensive stuff, make your own. I run a solution of it through my engine each salt water trip and also use it to wash salt off my fishing gear, the boat, etc.