What are all the parts of a hot tub?

What Are the Main Components of a Hot Tub?

  • The Shell. It’s exactly what it sounds like!
  • Cabinet. The purpose of the hot tub cabinet is two-fold.
  • Pumps.
  • Jets or Hydro Jets.
  • Blowers.
  • Spa Pack: Controller and Heater.
  • Topside (or Spaside) Control.
  • Filters / Sanitation System.

What does code E90 mean on Intex hot tub?

no water is flowing through the system
If alarm code E90 is displayed on the control panel, it means no water is flowing through the system. Check the attached troubleshooting guide. Spa E90 Troubleshooting.

What does error code E94 mean on Intex hot tub?

the water temperature is too low
If alarm code E94 is displayed on the control panel, it means the water temperature is too low. If alarm code E94 appears, unplug and plug back in the GFCI/RCD and test the GFCI/RCD to restart the system when the spa water temperature is higher than 39ºF (4ºC).

Why is my inflatable hot tub not heating up?

Your Hot Tub Won’t Heat Up Properly If your hot tub won’t heat the water properly, it could be the heater element or low flow from your pump. Most heating failure result from corrosion caused by low PH in water supply. Any PH below 7.0 damages the heating element and trips the GFCI breaker.

How does a hot tub heater work?

Hot tubs are warmed by electrical resistance heaters. Water courses through the assembly housing, where it comes into contact with an element coil that generates heat. The outside two layers of the assembly housing are the outer sheath (which is often gray) and the compacted filler and insulator.

What does E95 mean on a Intex hot tub?

water temperature is too high
If alarm code E95 is shown, it means the water temperature is too high. Let the spa water cool down to 104ºF (40ºC) or below, reset the control panel information by unplug and plug back in the GFCI/RCD, and reset the GFCI/RCD to restart the system. See owner’s manual for details.

How do I make my Intex hot tub hotter?

7 Hacks to Make Your Hot Tub Heat Up Faster

  1. Leave the cover on.
  2. Turn the jets on.
  3. Use a thermal spa blanket.
  4. Put a pop-up canopy tent around the tub.
  5. Wait for a warm day.
  6. Fill up with warm water.
  7. Use a portable immersion heater.

How long does Intex SPA take to heat up?

We advise to allow between 12-24 hours for the water to reach your desired temperature. Each time you turn your Simple Spa off, the water temperature will drop so always allow plenty of time for it to heat up before use.

By