What are the 3 main control measures for slips trips and falls?

How to prevent falls due to slips and trips?

  • cleaning all spills immediately.
  • marking spills and wet areas.
  • mopping or sweeping debris from floors.
  • removing obstacles from walkways and always keeping walkways free of clutter.
  • securing (tacking, taping, etc.)
  • always closing file cabinet or storage drawers.

How do you deal with slips trips and falls in the workplace?

Workplace incidents Workers should immediately notify their Supervisor/Manager and a PCBU must provide First Aid procedures. If there is a serious injury, death or dangerous incident at your workplace, you must report it to SafeWork NSW immediately on 13 10 50.

What are ten 10 common sources of slips trips or falls occurring in the workplace?

Let’s look at some common examples you might find in your workplace.

  • Wet floors. Wet floors can be caused by a variety of things.
  • Slippery floors.
  • Dusty floors.
  • Loose mats and floor coverings.
  • Unsuitable footwear.
  • Icy conditions.
  • Obstacles.
  • Loose flooring.

What is the most frequent factor in slip trip and fall incidents at the workplace?

Loss of traction is the leading cause of workplace slips. hazards like ice or snow. Slips are more likely to occur when you hurry or run, wear the wrong kind of shoes, or don’t pay attention to where you’re walking. a hurry and don’t pay attention to where you’re going.

What is the first step involved in a good management system of slip trip and fall accidents?

Plan pedestrian and vehicle routes to avoid contaminated areas. Make sure that your cleaning method is effective for the type of floor you have. Don’t introduce more slip or trip risks while cleaning is being done. Leave smooth floors dry after cleaning or exclude pedestrians until the floor is dry.

What are some of the most common injuries after slips trips and falls?

The most common injuries from these types of accidents, unsurprisingly, are fractures and dislocated joints. These are most commonly to the ankle or wrist, but fractures to fingers are also common. Shoulder dislocation and knee injury can also commonly occur.

What legislation covers slips trips and falls?

The Health and Safety at Work etc Act 1974 (HSW Act) requires employers to ensure the health and safety of all employees and anyone who may be affected by their work, so far as is reasonably practicable. This includes taking steps to control slip and trip risks.

What is the best way to avoid tripping at the workplace?

Here are 10 ways you can prevent slips, trips, and falls around the workplace:

  1. Keep walking surfaces clean and free of clutter. By keeping walkways clear, you can quickly reduce the potential for injury.
  2. Stairways & Handrails.
  3. Manage cords.
  4. Footwear.
  5. Lighting.
  6. Signage.
  7. Step stools.
  8. Check floor conditions, inside and out.

What will you do if somebody accidentally slips on the floor?

5 Steps to Take After a Slip, Trip, and Fall Accident

  1. Seek Medical Treatment. Your health—or the health of a loved one—should be your number-one priority following a slip, trip, and fall accident.
  2. Report the Accident.
  3. Document Everything.
  4. Decline to Give Statements.
  5. Call an Attorney.

By