What is a Meston plough?

MESTON PLOUGH  Meston plough is similar to the heavy type in construction but its parts are smaller and lighter.  It is also a lighter draft  The plough has wooden handle and a long wooden beam with an iron body.  Commonly used for both dry and wet ploughing.

What are the functions of a mouldboard plough?

Applications. The moldboard plow performs the following tillage operations and soil-conditioning functions: It cuts, lifts, breaks up, and loosens soil that has been compacted through machinery traffic or natural causes to a depth of usually 100–200 mm below the soil surface.

What are the two types of ploughing?

Ploughs are of three types: wooden ploughs, iron or inversion ploughs and special purpose ploughs.

What are the methods of ploughing?

Methods of ploughing

  • Continuous ploughing method.
  • Round and round ploughing.
  • One way ploughing.

What is the difference between mouldboard plough and disc plough?

There is one significant difference between mouldboard plough and disc plough i.e. mouldboard plough is forced into the ground by the suction of the plough, while the disc plough is forced into the ground by its own weight.

What is a rotary plough?

Rotary plows or tillers (sometimes called rototillers) have curved cutting knives mounted on a horizontal power-driven shaft. The pronged rotary hoe, a plow used chiefly for seedbed and weed control, works well at high speed.

How do you maintain a mouldboard plough?

Maintenanceof M.B. Plough: If you work the M.B. Plough on stony land then maintenance also increases….

  1. Before ploughing check all nuts and bolts of the MB. Plough.
  2. Don’t plough on stony soil.
  3. ractor should be in high first gear.
  4. If soil is hard then ploughing the field at least twice.

What are the components of mouldboard plough?

Components of Mould board plough

  • Share point : It is the forward end of the cutting edge which actually penetrates into the soil .
  • Cutting edge: It is the front edge of the share which makes horizontal cut in the soil.
  • Wing of share: It is the outer end of the cutting edge of the share.

What is reversible plough?

Reversible MB Plough is used for intial soil preparation for sowing seed or planting. Generally used for deep tillage of land, to help turn over the upper layer of the soil, bringing fresh nutrients to the surface, while buying weeds and remains of previous crop.

What is subsoil plough?

The subsoiler is so named because it cuts and loosens soil below the normal tillage depth of 100–200 mm. Its shape is similar to the chisel plow except that it is made with a stronger shank or leg in order to resist the higher force required to till soil at greater depth.

Which technology is used in plough?

With the industrial revolution came the possibility of steam engines to pull ploughs. These in turn were superseded by internal-combustion-powered tractors in the early 20th century.

What are the advantages of disc plough over mouldboard plough?

Advantages over Mould Board Plough: Disc plow can be forced to penetrate into soil, which is too hard and dry for working with a mould board plow. It works well in sticky soil in which a mould board plow doesn’t scour. It is more useful for deep plowing.

Who is John Meston?

John Lyman Meston (July 30, 1914 – March 24, 1979) was an American scriptwriter best known for co-creating with producer Norman Macdonnell the long-running Western series Gunsmoke.

What are the parts of a plough made of?

It is the main part of the plough to which the shoe, beam and handle are attached. It is a long wooden piece, which connects the main body of the plough to the yoke. A wooden piece vertically attached to the body to enable the operator to control the plough while it is working. Note:- Except share all other parts are made up of wood.

How old was Robert Meston when he was in the military?

Following his university studies and his work as a teacher, editor, reporter, and “range rider”, 27-year-old Meston returned to Pueblo and enlisted in the United States Army on July 7, 1942.