What is amercoat 450H used for?
Amercoat 450H can be used as a finish coat where attractive appearance and a wide range of corrosive resistance is required. *Certain colors (especially yellow, red and orange) may require additional coats to achieve adequate hiding, particularly when applied over dark or contrasting primer color.
How do you mix amercoat 450H?
Mixing ratio (by volume) 4 parts resin to 1 part cure Surface temperatures must be at least 5°F (3°C) above dew point to prevent condensation. *Surface must be dry and free of all contaminants.
What is amercoat?
Amercoat 68HS is a corrosion resistant zinc rich epoxy primer that protects steel substrates by sacrificing the zinc component and also insulating the steel substrate through barrier properties. Amercoat 68HS is designed to meet the needs of steel structures in coastal, high-humidity and offshore environments.
Who makes Amerlock paint?
PITTSBURGH–(BUSINESS WIRE)– PPG (NYSE: PPG) today announced the launch of PPG AMERLOCK® 600 multipurpose epoxy coating for applicators looking for maximum versatility in the shop or field.
What is Amerlock paint?
Amerlock is the high-solids, high-build epoxy protective coating that has revolutionized painting in tough industrial, marine and offshore environments around the world. Amerlock Series coatings are especially formulated to solve complex corrosion problems—with minimal surface preparation.
What is Amerlock?
Amerlock is the high-solids (85%), high-build epoxy protective coating that provides the solution to maintenance painting in tough industrial, marine and offshore environments around the world.
How do I thin my Amerlock 2?
Surface temperature
- 20°F to 122 °F (-6°C to 50°C)
- Amerlock 2 may be applied to surfaces as hot as 250°F (121°C) for non-immersion service.
- Amerlock 2 must be thinned at 1/2 pint per gallon with only.
- Amercoat 101 Multiple thin passes may be required to achieve film build and to avoid solvent blistering.
What kind of coating is Macropoxy 646?
polyamide epoxy
MACROPOXY 646 FAST CURE EPOXY is a high solids, high build, fast drying, polyamide epoxy designed to protect steel and concrete in industrial exposures. Ideal for maintenance painting and fabrica- tion shop applications. The high solids content ensures adequate protection of sharp edges, corners, and welds.
How do you mix Amerlock 400?
Mixing ratio by volume 1 part base to 1 part hardener Pre-mix pigmented components with a pneumatic air mixer at moderate speeds to homogenize the container. Add hardener to base and agitate with a power mixer for 1-2 minutes until completely dispersed.
How do you mix Amerlock paint?
Amerlock 400 to surfaces between 122°F and 250°F, Amerlock 400 must be thinned at 1/2 pint per gallon with only Amercoat 101 thinner. Multiple thin passes may be required to achieve film build and to avoid solvent blistering. General air quality Area should be sheltered from airborne particulates and pollutants.
Can you spray Macropoxy 646?
Sherwin-Williams® MACROPOXY® 646 can be applied by a nylon plaster blend or natural bristle brush. It can also be applied with a conventional spray gun and paint pressure pot with pressure cup as well as with an airless sprayer with a minimum of a 30:1 output ratio and that supports at least 017″-.
Is Macropoxy a primer?
MACROPOXY 5000 is an ultra high solids, penetrating epoxy primer / sealer designed for priming and sealing concrete prior to the application of coatings and linings.
Where to buy amercoat 450h Quick Reference Guide?
PPG Amercoat 450H quick reference guide C.G.Edwards & Co.Inc. 272 Dorchester Ave, P.O.Box 358 Boston, MA 02127 Phone: (617)268-4111-4112 * Fax:617-268-8845 E-mail: [email protected] Amercoat 450H quick reference Mixing ratio (by volume) 4 parts resin to 1 part cure
Amercoat. Amercoat ® products provide the confidence of heavy duty protection against chemical contact, corrosion, abrasion, and impact damage in the harshest of end use environments. Segments demanding heavy protective performance often include Transportation, Oil and Gas, Mining, Agricultural and Construction Equipment,…
Why choose ppg amercoat?
Additionally, Amercoat products are designed to be forgiving and easy to apply even on large, complex surfaces while meeting national and local VOC regulations. From the front office to the mix room to the paint booth, PPG empowers you to perfect every stage of color matching.
How long does it take to heat up a 450h?
Interval 32°F(0°C) 50°F(10°C) 70°F(21°C) 90°F(32°C) itself Minimum 24hours 12hours 4hours 2hours Maximum Unlimited Unlimited Unlimited Unlimited AMERCOAT®450H PRODUCTDATASHEET May2,2018(RevisionofOctober20,2017)