What size is 12AN?
AN Fitting and Hose Sizes
| Male Thread Size | AN Size* | Hose ID** |
|---|---|---|
| 3/4-16 | 8AN | 0.44″ |
| 7/8-14 | 10AN | 0.56″ |
| 1 1/16-12 | 12AN | 0.69″ |
| 1 5/16-12 | 16AN | 0.88″ |
What size is 8 an hose?
1/2″
Russell Performance Technical Support
| AN Size | Metal Tube O.D. | Thread Size |
|---|---|---|
| -8 AN | 1/2″ | 3/4″ – 16 SAE |
| -10 AN | 5/8″ | 7/8″ – 14 SAE |
| -12 AN | 3/4″ | 1-1/16″ – 12 SAE |
| -16 AN | 1″ | 1-5/16″ – 12 SAE |
What size is SAE 10?
SAE 45° Flare (SAE J512)
| Inch size | Dash size | Thread Size |
|---|---|---|
| 3⁄8 | -6 | 5⁄8 – 18 |
| 1⁄2 | -8 | 3⁄4 – 16 |
| 5⁄8 | -10 | 7⁄8 – 14 |
| 3⁄4 | -12 | 1 1⁄16 – 14 |
What does AN6 mean?
In bolts the number refers to the diameter of the bolt whereas in a fitting it refers to the OD of the tube and thereby have different threads. For example, AN6 bolt has a 3⁄8-24 thread whereas an -6 AN fitting has a 9⁄16-18 thread.
How are fuel line fittings measured?
Place the top of a 1/4-inch wrench with an open end over the fuel line. Slide it carefully over the line so that it fits snugly against the tubing. Read the wrench’s measurements to determine the diameter of the fuel line. Place a caliper over the fuel line if the wrench did not give an accurate reading.
What size is normal garden hose?
Garden hose diameters generally range from 1/2 to 3/4 inches. A garden hose size of 1/2-inch in diameter works for most home lawn and garden uses. A few specialty hoses offer a 1-inch diameter, but length choices are limited. Larger diameter hoses are for heavy-duty watering tasks.
What size is a hose fitting?
In the US, hoses are normally supplied with a 3/4″ GHT fitting on the bib end of the hose so that it can be screwed straight onto the bib. Screw a 3/4 -inch brass or plastic fitting onto the tap.
What is SAE 10?
The SAE 10 Oil category represents lubricants that have a viscosity grade of SAE (Society of Automotive Engineers) 10. This grading system tells you the thickness of the oil and how it is affected by temperature. In this case, the “10” represents the thickness of the oil at operating temperature.