Where does the red wire go on a Leviton 3-way switch?

Figure A: 3-Way Switch Wire Diagram — Power to Light Fixture The black hot wire connects to the far right switch’s common terminal. Red and blue wires link traveler terminals of both switches. The red wire, which is connected to the first switch’s common terminal, leads back to the fixture.

How many wires does a 3-way dimmer switch have?

Installing a 3-way switch 3-way switches are also marked with four wires in the wall outlet: a ground wire, a hot lead wire, and two travelers to allow for a connection to another switch or outlet. Make sure the electricity is turned off at the main fuse box before proceeding.

Which wires go on a 3-way switch?

With a three-way switch, three wires connect the pair of switches—two black “traveler” wires and a third “common” wire. When the circuit’s power is turned on, any of these may be “hot,” depending upon how the switches are toggled.

Do both 3 way switches need to be dimmers?

You will need a three-way dimmer and a three-way switch. This lets you dim from one location and turn the lights on and off from another. If only one switch controls the light, purchase a single-pole dimmer. If two switches control a single light or a group of lights, you will need a three-way dimmer.

What color wire goes to the black screw on a 3 way switch?

Black screw terminal: The black (or darkest in color) screw attaches to the black common wire from the 14/2 cable. The terminal may be labeled COM. Green screw terminal: The green screw is the ground terminal.

How do I connect my Leviton dimmer switch?

– Locate and open the Leviton “Decora Digital Dimmer & Timer” app on your smart device. – Select the “+” sign at the top right corner to add your Decora Digital device. – Follow the on-screen instructions to pair your smart device: – Hold the OFF button on your Decora Digital device until its status LED blinks.

Why does my 3 way dimmer switch not work?

It sounds like someone has put a single pole switch in a system that needs two three ways. Part of the problem is that there needs to be the right wiring between the switches. There has to be two hot wires*. There also may need to be a neutral wire, depending on the wiring configuration.

Why does my dimmer switch have 3 wires?

A 3-wire NM connects the travelers of the dimmer to the travelers of the 3-way switch. Traveler wires are interchangeable on each switch.