Why is my washer not going through the spin cycle?

Normally, your washing machine won’t go into a spin cycle until it’s been drained. The drainage hose may become clogged with debris from your clothing, or it could be kinked. If the hose is kinked or crushed, it will likely need to be replaced.

How do I fix my GE washer that won’t spin?

How to Fix GE Washer Not Spinning?

  1. Check the Detergent Type: Make sure you are using the right kind.
  2. Check the detergent level:
  3. Check the level of the water in the tub:
  4. Check the water type:
  5. Make sure the water is at the correct temperature:
  6. Check the agitator:
  7. Check the fabric type:
  8. Check the spin cycle:

How do you reset the spin cycle on a GE washing machine?

Motor Reset Procedure:

  1. Unplug the washer for 1 minute from the electrical outlet.
  2. Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid.
  3. The motor has now been reset and is ready for you to start a cycle.

Does GE washer have a reset button?

There is not an actual reset button on a GE washing machine. However, pushing the ‘Cancel’ button will clear any error message between the control board and the cycle control switch. Pressing the ‘Pause’ or ‘Stop’ button will then reset the cycle function.

How do I troubleshoot my GE washing machine?

How to Troubleshoot a GE Top Load Washer

  1. Check the amount of detergent you have put in the washer.
  2. Examine the GE top load washer’s drain hose for leaks.
  3. Check the water connections to your GE top load washer.
  4. Check whether the GE top load washer lid is closing firmly.
  5. Check the load in your GE top loading washer.

Is there a reset button on GE washing machine?

How do I reset my GE washing machine?

Unplug the washer for one minute, then plug the washer back into the electrical outlet and lift and lower the lid six times within 12 seconds. This will reset the motor and you should be able to start the cycle.

Why won’t my ge washer spin?

If your GE washer won’t spin, check to make sure the lid switch is being activated mechanically. If it is, then you’ll need to inspect the washer to see if any of the levers are sticking or if any of the actuators are damaged. A defective switch will cause the motor to be unresponsive even though it is being activated mechanically by the lid.

Are GE washing machines easy to repair?

GE washers are well-known for their high quality and durability. However, with age and continuous use, even the best washers will need repair at some point in time. While this may be unnerving for some people, it is very easy to repair a GE washing machine with a little patience and know-how.

Why does my Kenmore washer keep stopping the spin cycle?

If the washer basket is filled with laundry beyond the balance ring, the washer may begin to shake and this may cause the spin cycle to stop. Twist the leveling feet clockwise until they reach the ground. Twist and turn the locking nuts counter-clockwise to lock the leveling feet in place. For more information, view the following video:

How do I restart the wash cycle on my Kenmore washer?

Press the Start/Pause button to restart the wash cycle. If the Start/Pause button is not pressed after closing the lid, the washer will not start on its own and it will shut off after a short delay.

By